We offer a full air conditioning service including gas top up and repairs. We are the Thermoking agent for the Lower North Island so we can source air conditioning parts and complete the repairs for you too. We have the latest hose and pipe making equipment to allow us to complete repairs on the vehicle without removing the air conditioning pipes.
Components of Automotive Air Conditioning
Your air conditioning system is made up of a compressor, a condenser, an evaporator (or drier), refrigeration lines and a couple of sensors here and there.
Compressor : This is the heart of your a/c system. The compressor is what takes the refrigerant (the gas) and pressurizes it so it will cool the air. It’s run by an engine belt. The compressor also has an electrically operated clutch that turns the compressor on and off as you demand more cool air.
Condenser: The condenser is like a miniature radiator, usually mounted at the front of the car right next to your big radiator. Sometimes the condenser will have its own electric cooling fan, too. The hot, compressed air passes through the condenser and gets lots cooler. As it cools, it becomes a liquid.
Evaporator : The evaporator is another little radiator that does just the opposite task as the condenser. As the super-cool liquid is passed through its tubes, air is forced through and gets really cold, right before it hits your face. As it warms up again, the refrigerant starts turning back into a gas.
Thermal Expansion Valve : You don’t always want to freeze your toes off, so the a/c system has a valve that controls the flow of super-cool refrigerant to the evaporator. This way you can regulate how cold the air blowing on you gets. There are a few types of valves in use these days, but they all do the same thing.
Drier or Accumulator : The drier, also known as the receiver-drier, is sort of the safety catch for your system. The compressor is only supposed to compress the gas form of your refrigerant. However, there’s always a chance that some liquid could make it back that far. The drier catches this liquid before it can damage your compressor. Since even the tiniest leak or careless installation can introduce water moisture to the system, the drier absorbs this chemically, using what’s called a dessicant (similar to that packet of “DO NOT EAT” that comes with electronics). The drier also has a filter that catches any gunk that might be in there.
Quickstart Automotives ethos is to provide customers with quality workmanship in everything that we do.
Providing cost-effective solutions delivered on time, every time. Offering Value without compromising on quality